To place an order in the U.S., call 877-285-4466. Outside the U.S., call 01-937-652-3500.

L-810 LED

Airfield Category: View All
Tower and Obstruction Categories: Low Intensity / Medium Intensity / High Intensity / Accessories

FAA Type: L-810 Steady Burn Obstruction Light

HORIZON™ L-810 LED Obstruction Light

Application:

The Hughey & Phillips L-810 Obstruction Light provides an LED based solution to the FAA L-810 style of steady burning lights. The L-810 LED is currently available in both single and double configurations operating at 120V, 240V, 265VAC and also in a range of 9-48 VDC. Both configurations are available as original equipment or as a direct replacement to the existing socket/lamp/lens on H&P L-810 Incandescent OB2x Series obstruction lights.

  • FAA Type: L-810 Steady Burn Obstruction Light
  • ICAO Type: Low Intensity Type B Obstacle Light
  • Certified to: FAA AC 150/5345-43
  • Compliant to: Transport Canada CAR 621.19, ICAO Annex 14, USAF AFMAN 32-1076

(Product Sheet PDF)

Features:

  • LED based obstruction lights last over 15 times longer than an incandescent light
  • Approximately 94% less power than 116 Watt standard incandescent lamp
  • 4 Watt Power Consumption (AC version) / 3.4 Watts (DC Version)
  • Available in both side and bottom conduit hubs at 3/4” and 1” NPT
  • Weather resistant lamp assembly & housing
  • Self-contained wiring compartment on double units eliminates additional boxes
  • Operates as a steady burn or flashing light
  • Resistant to shock and vibration
  • Direct replacement for existing incandescent fixtures
  • 5 Year Warranty

Photometric Specifications:

  • Beam Spread: 360° Horizontal, 10° Minimum Vertical
  • Effective Intensity: > 32 Candela

Mechanical Specifications:

  • Base Material: Cast Aluminum with aviation red powder coat
  • Lens: Heat resistant clear glass
  • Single: 8” x 5.5” x 5.5” (H x W x L), 2 lbs.
  • Double: 8” x 5.5” x 11.5” (H x W x L), 6 lbs.

Environmental Specifications:

  • Temperature: -40°C to +55°C (-40°F to 131°F)
  • Humidity: 95% Relative Humidity
  • Miscellaneous: Will withstand exposure to wind-blown rain from any direction, salt-laden atmosphere and windspeeds of 240 kph (150 mph).
Part Number Description
45-1000-001 L-810 LED 95-265VAC SGL BOT 3/4" HUB
45-1001-001 L-810 LED 95-265VAC SGL BOT 1" HUB
45-1002-001 L-810 LED 95-265VAC SGL SIDE 3/4" HUB
45-1003-001 L-810 LED 95-265VAC SGL SIDE 1" HUB
45-1004-001 L-810 LED 95-265VAC DBL BOT 3/4" HUB
45-1005-001 L-810 LED 95-265VAC DBL BOT 1" HUB
45-1006-001 L-810 LED 95-265VAC DBL SIDE 3/4" HUB
45-1007-001 L-810 LED 95-265VAC DBL SIDE 1" HUB
45-1008-001 L-810 LED 9-48VDC SGL BOT 3/4" HUB
45-1009-001 L-810 LED 9-48VDC SGL BOT 1" HUB
45-1010-001 L-810 LED 9-48VDC SGL SIDE 3/4" HUB
45-1011-001 L-810 LED 9-48VDC SGL SIDE 1" HUB
45-1012-001 L-810 LED 9-48VDC DBL BOT 3/4" HUB
45-1013-001 L-810 LED 9-48VDC DBL BOT 1" HUB
45-1014-001 L-810 LED 9-48VDC DBL SIDE 3/4" HUB
45-1015-001 L-810 LED 9-48VDC DBL SIDE 1" HUB
Spare Parts Description
45-0001-001 L-810 LIGHT MODULE 95-265VAC
45-0002-001 L-810 LIGHT MODULE 9-48VDC
A6A0008AG NEOPRENE GASKET
B6A0008AA LENS HOLDER w/7" CHAIN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Incandescent and LED steady-burning obstructions lights to flashing red beacons (L-810, L-864, L-865, etc).

Scroll down for detailed information on all the different types of obstruction lights and beacons offered.

Product Information

LED Visual Signal Light (860 Series)

The 860 Series multi-purpose LED obstruction light fulfills the need for a rugged, weatherproof, steady-burning fixture in color alternatives.

Data Sheet (.pdf)

Compliances

ETL Listed in compliance with UL 1598 and UL 844 for use in Class 1 Division 2
ETL Certified

Product Application

Steady-burning obstruction marking and lighting. The 860 Series multi-purpose LED obstruction light fulfills the need for a rugged, weatherproof fixture in color alternatives. Available in green, yellow, blue and white.

Features

  • Available as a single or dual unit.
  • Available in 120VAC, 240VAC, 12, 24 or 48 VDC.
  • Unique optically designed lens to enhance LED operation and provide 360° visibility.
  • State-of-the-art high flux LED technology.
  • Uses 90% less energy than an incandescent.
  • Lasts years longer than an incandescent.
  • Weather/corrosion resistant lamp assembly and housing.
  • Self-contained wiring compartment eliminates additional boxes.
  • Can be operated steady or flashed.
  • Resistant to shock and vibration.
  • Threaded 1” and ¾” bottom hub for mounting.
  • IP65 / IP66 / NEMA 4X rated.

L-810 LED Series Red Obstruction Light (860 Series)

The 860 Series is the FAA type L-810 red LED steady-burning obstruction light.

Data Sheet (.pdf)

Compliances

FAA AC 150/5345-43 (current edition)
Engineering Brief 67D
ETL Certified
ICAO (Annex 14 - Fourth Edition, July 2004)

Product Application

The 860 Series is the FAA type L-810 red LED obstruction light. Designed for steady burning, this fixture is used to mark any obstacle that may present hazards to aircraft navigation.

Features

  • Patented technology.
  • Cast Aluminum housing.
  • Stainless steel hardware.
  • Available as a single or dual unit.
  • Available in 12 VDC, 24 VDC, 48 VDC, 120 VAC & 220 VAC(50 or 60 Hz).
  • Earth grounding provisions provided.
  • Unique optically designed lens to enhance LED operation and provide 360° visibility.
  • State-of-the-art high-flux LED technology.
  • Estimated service life 12-15 years.
  • Weather/corrosion resistant lamp assembly and housing.
  • Self-contained wiring compartment eliminates additional boxes.
  • Threaded 1” and ¾” bottom hub for mounting.
  • Can be operated steady or flashed (controller not supplied).
  • Resistant to shock and vibration.
  • IP65 / IP66 / NEMA 4X rated.

L-810 LED Red Obstruction Light (RTO Series)

This obstruction light is a steady-burning LED red light used for obstruction marking and lighting. The RTO Series is a universal, compact and efficient obstruction light. Also available as a single fixture for direct replacement of incandescent lamp/lens technology.

Data Sheet (.pdf)

Compliances

FAA AC 150/5345-43 (current edition)
Engineering Brief 67D
ETL Certified
ICAO (Annex 14 - Fourth Edition, July 2004)

Product Application

The FAA type L-810 red LED steady-burning obstruction light is used to mark any obstacle that may present hazards to aircraft navigation.

Features

  • Available as a single, dual or retro-fit unit.
  • Available in 120 - 277 VAC; and 12 - 48 VDC.
  • Grounding terminals provided.
  • Unique optical design (patent pending).
  • Advanced high-flux LED technology.
  • Estimated service life 12-15 years.
  • Weather/corrosion resistant lamp assembly and housing.
  • Self-contained wiring compartment eliminates additional boxes.
  • Threaded 1” and ¾” bottom hub for mounting.
  • Can be operated steady or flashed.
  • Uses 95% less energy than incandescent.
  • Resistant to shock and vibration.
  • IP65 / IP66 / NEMA 4X.

L-864 / L-865 LED Medium Intensity Lighting System

The L-864/L-865 LED Medium Intensity Lighting System is designed for the lighting of obstructions to aerial navigation as specified by the FAA and FCC.

Data Sheet (.pdf)

Compliances

FAA AC 150/5345-43 (current edition)

Engineering Brief 67D
ETL Certified
ICAO (Annex 14 - Fourth Edition, July 2004)

Product Application

The L-864/L-865 LED Medium Intensity Lighting System is designed for the lighting of obstructions to aerial navigation as specified by the FAA and FCC. The dual L-864/L-865 uses LED technology for light output for both the red beacon and the white strobe. The system operates from a universal 100/230 VAC 50/60 Hz supply and controller which can be located up to 550 feet away from the Flash Head.

Features

  • Easy access, color coded terminal blocks for quick and easy installation.
  • Hinged Flash Head with color coded terminal block for secure cable install.
  • Strategically placed control components to simplify troubleshooting.
  • “No-Fault” current limiters built in to protect system from incorrect installs.
  • No high voltages as found in Xenon systems.
  • Patented optics eliminate ground scatter.
  • No moving or serviceable parts in Flash Head; all replacement components located at tower base.
  • Resistant to shock and vibration.
  • Tested and passed surge tests up to 1.9 Million Volts.
  • No EMI or RF.
  • IP66 rated.

L-864 LED Red Beacon Medium Intensity Lighting System (D464 Series)

This L-864 LED-based flashing red beacon is a medium intensity obstruction light. The D464 Series fixture utilizes a state-of-the-art optical design to achieve a compact and efficient lighting system.

Data Sheet (.pdf)

Compliances

FAA AC 150/5345-43 (current edition)

Engineering Brief 67D
ETL Certified
ICAO (Annex 14 - Fourth Edition, July 2004)

Product Application

This L-864 LED-based flashing red beacon is used for obstruction marking and lighting. The D464 Series fixture utilizes a state-of-the-art optical design to achieve a compact and efficient lighting system. While it readily interfaces into existing installations, its robust, low-power design will provide years of maintenance-free service.

Features

  • Over 90% more efficient than an incandescent.
  • Steady Burn or Flashes (20-40fpm) when paired with a controller.
  • Resistant to shock and vibration.
  • FCC Testing EMC #47CFR, Part 15; 2008; Class A.

L-810 LED Red Obstruction Light for Hazardous Locations (860 Series)

The L-810 red obstruction light is an LED-based Class I Division 2 certified fixture, used to mark obstructions on structures in hazardous environments.

Data Sheet (.pdf)

Compliances

FAA AC 150/5345-43 (current edition)
Engineering Brief 67D
ETL Certified
ICAO (Annex 14 - Fourth Edition, July 2004)

Product Application

The L-810 steady-burning red obstruction light is an LED-based Class I Division 2 certified fixture, used to mark obstructions on structures in hazardous environments. This fixture provides a valuable solution to airport facilities in demanding and dangerous environments.

Features

  • Available as a single or dual unit.
  • Suitable for all Class 1 Div. 2, Groups A, B, C, D hazardous environments; T4 rated.
  • Unique optically designed lens to enhance LED operation and provide 360° visibility.
  • ATEX certified, equipment group II (surface industries) category 3 (zone 2), T4 rated.
  • Up to 100,000 hours LED service life.
  • Weather/corrosion resistant lamp assembly and housing.
  • Self-contained wiring compartment eliminates additional boxes.
  • Threaded 1” and ¾” bottom hub for mounting.
  • Can be operated steady or flashed.
  • Resistant to shock and vibration.
  • IP65 / IP66 / NEMA 4X rated.

L-864 Incandescent Red Flashing Beacon

This L-864 type fixture is a medium intensity flashing red beacon used to light aviation obstructions taller than 150 feet AGL.

Data Sheet (.pdf)

Compliances

FAA AC 150/5345-43 (current edition)
Engineering Brief 67D
ETL Certified

Product Application

A medium intensity flashing red beacon used to light aviation obstructions taller than 150 feet AGL.

Features

  • Porcelain receptacles with nickel plated brass bayonet shell.
  • Neoprene and Teflon gaskets for superior weather seal.
  • High grade copper free aluminum castings and stainless steel hardware for corrosion protection.
  • Stainless steel wingnuts means no special tools required to change bulbs.
  • High temperature resistant wire and tie wraps.
  • Silicone fused lenses eliminates gasket “dead spot” at light focus.

L-810 Incandescent Obstruction Light

The L-810 type fixture is a steady-burning, low-intensity, red obstruction light used to light aviation obstructions taller than 150 feet AGL.

Data Sheet (.pdf)

Compliances

FAA AC 150/5345-43 (current edition)
Engineering Brief 67D
ETL Certified

Product Application

The OL1 (single) and OL2 (double) obstruction lights (low intensity) are used to light aviation obstructions taller than 150 feet AGL.

Features

  • High quality porcelain receptacles.
  • High temperature, ultra-pure FAA approved aviation red, blue, yellow or clear glass Fresnel lens.
  • Neoprene gaskets for superior weather seal.
  • High grade copper free aluminum castings andstainless steel latches and hardware for corrosion protection Stainless steel safety cable.
  • Can be used as steady burning or flashing.
  • Bottom hub entry also available (OL1).
  • 0.75"; 1" or 1.25" NPT hub sizes.
  • No special tools required for maintenance.

Comments are closed.