To place an order in the U.S., call 877-285-4466. Outside the U.S., call 01-937-652-3500.

Taxiway Lights

Airfield Category: View All
Tower and Obstruction Categories: Low Intensity / Medium Intensity / High Intensity / Accessories

Taxiway Lights
L-861T LED   L-852T LED   L-852A/B/C/D LED
L-852J/K LED
   L-852G LED   L-852S LED
L-804 LED   L-861T Quartz

_____

L-861T LED

Medium Intensity Taxiway Edge Light 

 

The L-861T LED elevated fixture is an omnidirectional blue light that is used to delineate the edges of airport taxiways, holding bays, and aprons. It is available in the traditional style (shown with tall blue lens) or a new, more energy-efficient dome style version, called the Navigate Series® L-861T.

Navigate Series Fixture Documents:

Data Sheet (.pdf)
Installation & Maintenance Manual (.pdf)
Sample Specification (.pdf)

Traditional Fixture Documents:

Data Sheet (.pdf)
Installation & Maintenance Manual (.pdf)
Sample Specification (.pdf)

Product Information

FAA AC 150/5345-46 (current edition)
Engineering Brief 67D
ETL Certified

Navigate Series Fixture FAA Certificate of Conformance (.pdf)
Traditional Fixture FAA Certificate of Conformance (.pdf)

Meets “Buy American” requirements.

ICAO: Annex 14, Vol. 1, para. 5.3.17
Navigate Series Fixture ICAO Certificate of Conformance (.pdf)

Application

The L-861T LED elevated fixture is an omnidirectional, medium-intensity, blue light that is used to delineate the edges of airport taxiways, holding bays, and aprons.

Features

  • Die cast aluminum body.
  • Total Harmonic Distortion (THD) less than 1.1%.
  • Less than 8.2VA and less than 15VA at the highest step on a 6.6A series circuit for the Navigate Series fixture and the traditional fixture respectively.
  • Fixture MTBF is greater than 50,000 hours.
  • Complies with intensity requirements for 3- and 5-step series circuits for the Navigate Series fixture.
  • Optional arctic kit available.
  • Requires only a 10/15W isolation transformer on the non-arctic kit version.

_____

L-852T LED

Style-3 In-set Light

The Navigate Series® L-852T LED Style-3 fixture is an omnidirectional in-pavement light that is used to delineate the edges of airport taxiways, aprons and heliports.

Data Sheet (.pdf)
Installation & Maintenance Manual (.pdf)
Sample Specification (.pdf)

Product Information

FAA AC 150/5345-46 (current edition)
Engineering Brief 67D
ETL Certified
Certificate of Conformance (.pdf)
Meets “Buy American” requirements.

Application

The Navigate Series® L-852T LED Style-3 fixture is an omnidirectional in-pavement fixture that is used to delineate the edges of airport taxiways, aprons and heliports.

Features

  • Lowest FAA-approved style-3 profile in the industry.
  • Easy to maintain. All renewal parts are field replaceable.
  • Pressure test valve for seal integrity verification.
  • LED life greater than 50,000 hours.
  • Operates on all types of CCRs.
  • Optional thermostatically controlled heater (arctic kit) that cycles on and off when temperature drops below freezing, reducing overall energy consumption.
  • Seals tested to resist Cryotech XT350, EX180, and E36 de-icing fluids.
  • Requires only a 10/15W isolation transformer on a 6.6A, 50 or 60 Hz series circuit without an arctic kit.

_____

L-852A/B/C/D LED

Style-3 In-set Light

The Navigate Series® L-852A/B/C/D LED Style-3 inset fixtures delineate taxiway centerlines on both straight and curved sections, depending on the application.

Data Sheet (.pdf)
Installation & Maintenance Manual (.pdf)
Sample Specification (.pdf)

Product Information

FAA AC 150/5345-46 (current edition)
Engineering Brief 67D
ETL Certified
Certificate of Conformance A (.pdf)
Certificate of Conformance B (.pdf)
Certificate of Conformance C (.pdf)
Certificate of Conformance D (.pdf)
Meets “Buy American” requirements.

Application

L-852A: Taxiway centerline, Straight sections; Clearance bar (≥1200 Runway Visual Range (RVR))
L-852B: Taxiway centerline, Curved sections; (≥1200 RVR)
L-852C: Taxiway centerline, Straight sections; Clearance bar (<1200 RVR)
L-852D: Taxiway centerline, Curved sections; (<1200 RVR)

Features

  • High-powered LEDs with optically matched glass lenses.
  • Easy to maintain. All renewal parts are field replaceable.
  • Pressure test valve for seal integrity verification.
  • LED life greater than 50,000 hours.
  • Optional thermostatically controlled heater (arctic kit) that cycles on and off when temperature drops below freezing, reducing overall energy consumption.
  • Seals tested to resist Cryotech XT350, EX180, and E36 de-icing fluids.

_____

L-852J/K LED

Style-3 Taxiway Centerline Light 

The Navigate Series® L-852J/K LED Style-3 inset fixtures delineate taxiway centerlines on curved sections.

Data Sheet (.pdf)
Installation & Maintenance Manual (.pdf)

Product Information

FAA AC 150/5345-46
(current edition)
Engineering Brief 67D
ETL Certified
Certificate of Conformance J (.pdf)
Certificate of Conformance K (.pdf)
Meets “Buy American” requirements.

 Application

L-852J: Taxiway centerline, Curved sections; Clearance bar (≥1200 Runway Visual Range (RVR))
L-852K: Taxiway centerline, Curved sections; (<1200 RVR)

Features

  • High-powered LEDs with optically matched glass lenses.
  • Easy to maintain. All renewal parts are field replaceable.
  • Pressure test valve for seal integrity verification.
  • LED life greater than 50,000 hours under high intensity conditions.
  • Optional thermostatically controlled heater (arctic kit) that cycles on and off when temperature drops below freezing, reducing overall energy consumption.
  • Seals tested to resist Cryotech XT350, EX180, and E36 de-icing fluids.

_____

L-852G LED

Runway Guard Light

The Navigate Series® L-852G LED in-pavement fixtures are Style-3, medium-intensity Runway Guard Lights (RGLs) that provide unidirectional, alternately flashing, yellow lights.

Data Sheet (.pdf)
Installation and Maintenance Manual (.pdf)
Sample Specification (.docx)

Product Information

FAA AC 150/5345-46 (current edition)
Engineering Brief 67D
Meets the requirements of Low Visibility Taxiway Lighting Systems as specified by FAA AC 150/5340-30 (current edition).
ETL Certified
FAA Certificate of Conformance (.pdf)
Meets “Buy American” requirements.

ICAO: Annex 14, Vol. I, par. 5.3.12 and Appendix 2, Figure A2-7
ICAO Certificate of Conformance (.pdf)

Application

The Navigate Series® L-852G LED in-pavement fixtures are typically installed across taxiway holding areas and used for runway incursion protection and traffic control on taxiways.

Features

  • FAA Style-3 fixture with less than 0.25 inches above ground height.
  • Lower power consumption and less required maintenance compared to non-LED version, resulting in lower life-cycle costs.
  • Easy to maintain. All components of the fixture are easily replaced.
  • Can be installed on existing series circuits with no modifications to existing CCR or isolation transformer.
  • Operates on 3- and 5-step ferroresonant or thyristor CCRs.
  • Optional thermostatically controlled heater (arctic kit) that cycles on and off when temperature drops below freezing, reducing overall energy consumption.
  • Fixture uses high-strength aluminum optical assembly, stainless steel hardware, and a hardened optical glass lens.
  • Seals tested to resist Cryotech XT350, EX180, and E36 de-icing fluids.
  • Includes UL 467-rated ground lug that accepts an AWG 6 earth ground wire.

_____

L-852S LED

Stop Bar Light 

The Navigate Series® L-852S LED in-pavement fixture is a Style-3, medium-intensity Runway Entrance Light (REL) installed before active runways and used for runway incursion protection and traffic control on taxiways. The fixture provides unidirectional, steady burning, red lights.

Data Sheet (.pdf)
Installation and Maintenance Manual (.pdf)

Product Information

FAA AC 150/5345-46 (current edition)
Engineering Brief 67D
Meets the requirements of Low Visibility Taxiway Lighting Systems as specified by FAA AC 150/5340-30 (current edition).
ETL Certified
FAA Certificate of Conformance (.pdf)
Meets “Buy American” requirements.

Application

The Navigate Series® L-852S LED Style-3, unidirectional red, stop-bar, in-pavement light helps prevent runway incursions.

Features

  • FAA Style-3 fixture with less than 0.25 inches above ground height.
  • Lower power consumption and less required maintenance compared to non-LED version, resulting in lower life-cycle costs.
  • Easy to maintain. All components of the fixture are easily replaced.
  • Can be installed on existing series circuits with no modifications to existing CCR or isolation transformer.
  • Operates on 3- and 5-step ferroresonant or thyristor CCRs.
  • Optional thermostatically controlled heater (arctic kit) that cycles on and off when temperature drops below freezing, reducing overall energy consumption.
  • Fixture uses high-strength aluminum optical assembly, stainless steel hardware, and a hardened optical glass lens.
  • Seals tested to resist Cryotech XT350, EX180, and E36 de-icing fluids.
  • Includes UL 467-rated ground lug that accepts an AWG 6 earth ground wire.

_____

L-804 LED

Runway Guard Light 

The Navigate Series® L-804 LED runway guard light (RGL) is a unidirectional elevated fixture that alternately flashes to warn pilots that they are approaching a runway hold area and are about to enter an active runway.

Data Sheet (.pdf)
Installation and Maintenance Manual (.pdf)
Sample Specification (.pdf)

Product Information

FAA AC 150/5345-46 (current edition)
Engineering Brief 67D
ETL Certified
FAA Certificate of Conformance (.pdf)
Meets “Buy American” requirements.
Meets the requirements of FAA AC 150/5340-30 (current edition).

ICAO: Annex 14, Vol. I, Sixth Edition
ICAO Certificate of Conformance (.pdf)

Application

The Navigate Series® L-804 LED RGL is a yellow unidirectional elevated fixture that alternately flashes to warn pilots that they are approaching a runway hold area and are about to enter an active runway. The RGL is typically installed in pairs with one on both sides of the taxiway holding area.

Features

  • Fewer LEDs used than other ETL-certified RGLs on the market.
  • LED life greater than 50,000 hours.
  • Less required maintenance compared to non-LED RGLs.
  • Significantly reduces load on the CCR compared to non-LED RGLs.
  • Complies with intensity requirements for 3-step and 5-step circuits.
  • Easy to install and maintain.
  • Adjustable light beam: 0 to 20 degrees vertically; ±20 degrees horizontally.
  • Alternating flash rate of 40-50 flashes per minute.
  • Corrosion-resistant.
  • ICAO yellow and FAA yellow available
  • Includes frangible coupling and tether.

_____

L-861T Quartz

Medium Intensity Taxiway Edge Light 

The elevated L-861T Quartz medium intensity edge light is used to define taxiways.

Data Sheet (.pdf)
Installation & Maintenance Manual (.pdf)

Product Information

Intertek 57x80FAA AC 150/5345-46 (current edition)
ETL Certified
Certificate of Conformance (.pdf)
Meets “Buy American” requirements.

Application

The L-861T Quartz medium intensity elevated fixture is an omnidirectional blue light that is used to define taxiways.

Features

  • Die cast aluminum housing.
  • Quick release stainless steel clamp allows for easy lamp changes.
  • All materials are corrosion resistant.
  • Lens is keyed to ensure proper runway orientation.
  • Easy to maintain; no special tools needed.
  • Available in heights from 14-30 inches.

Comments are closed.